LORA RA 02 Module
₱630.00
Ra-02 can be used for ultra-long distance spread spectrum communication, and compatible FSK remote modulation and demodulation
quickly, to solve the traditional wireless design can not take into account the distance, anti-interference and power consumption.
Description
Think It… Make It… Invent!
Specifications:
Module Model Ra-02
Package SMD-16
Size 17*16*(3.2 ± 0.1) mm
Interface SPI
Programmable bit rate UP to 300Kbps
Frequency Range 410-525 MHz
Antenna IPEX
Max Transmit Power 18±1 dBm
Power (Typical Values)
433MHz: TX:93mA RX:12.15mA Standby:1.6mA
470MHZ: TX:97mA RX:12.15mA Standby:1.5mA
Power Supply 2.5~3.7VˈTypical 3.3V
Operating Temperature -30 ć ~ 85 ć
Storage Environment -40 ć ~ 90 ć , < 90%RH
Weight 0.45g
Package SMD-16
Size 17*16*(3.2 ± 0.1) mm
Interface SPI
Programmable bit rate UP to 300Kbps
Frequency Range 410-525 MHz
Antenna IPEX
Max Transmit Power 18±1 dBm
Power (Typical Values)
433MHz: TX:93mA RX:12.15mA Standby:1.6mA
470MHZ: TX:97mA RX:12.15mA Standby:1.5mA
Power Supply 2.5~3.7VˈTypical 3.3V
Operating Temperature -30 ć ~ 85 ć
Storage Environment -40 ć ~ 90 ć , < 90%RH
Weight 0.45g
Features:
– LoRa ™ spread spectrum modulation technology
– Receive sensitivity as low as -141 dBm
– Excellent resistance to blocking
– Supports preamble detection
– Supports half-duplex SPI communication
– Programmable bit rate up to 300Kbps
– Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
– Supports automatic RF signal detection, CAD mode and ultra high speed AFC
– Packets with CRC, up to 256 bytes
– Small package with double volume stamps
– Receive sensitivity as low as -141 dBm
– Excellent resistance to blocking
– Supports preamble detection
– Supports half-duplex SPI communication
– Programmable bit rate up to 300Kbps
– Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
– Supports automatic RF signal detection, CAD mode and ultra high speed AFC
– Packets with CRC, up to 256 bytes
– Small package with double volume stamps
Additional information
| Weight | 1 kg |
|---|
Related products
-
SALE!
Add to cartMORE INFOJoyStick Breakout Module
Lots of robot projects need joysticks. This module provides an affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. This joystick module can be easily connect to Arduino by normal IO Expansion Shield with supplied cables.
₱105.00₱90.00
Reviews
There are no reviews yet.