FORGOT YOUR DETAILS?

CREATE ACCOUNT

SALE!

Atlas Scientific Dissolved Oxygen Test Kit

20,000.00 17,499.00

Description

Think It! Make it! Invent!

DESCRIPTION

The Dissolved Oxygen Kit comes with everything you need to take accurate, full-range D.O. readings for your environmental monitoring, hydroponics, wine making, fish keeping… well, any project where you need to continuous or intermittent Dissolved Oxygen readings. There’s a simple 5-second calibration that is required before you can deploy the probe (calibration solution is included with the kit) and it can be immersed and operating continuously for 12 months before recalibration is recommended!

The Dissolved Oxygen circuit returns data in the form of Mg/L to two significant figures. Readings can be taken either dependent or independently of temperature or conductivity and the probe will function correctly in fresh-, salt- or brackish water.

LIKE US ON FACEBOOK: EDW ELECDESIGNWORKS

 


PACKAGE INCLUDES:

1 x Dissolved Oxygen Circuit
1 x Dissolved Oxygen Probe
1 x 25ml (4oz) 0 Dissolved Oxygen calibration solution (used to confirm that the D.O. is working properly)
1 x Pre-Assembled Female BNC connector

Dimensions (mm)
Weight (g)

 


TECHNICAL DETAILS

Dissolved Oxygen Probe Datasheet

Probe Max Pressure: 690 kPa (100PSI)
Probe Max Depth 60 M (197 ft)
Probe Weight: 51 grams

Dissolved Oxygen Circuit Datasheet

Reads

  • Full range dissolved oxygen readings from 0.01 to +35.99 mg/L
  • Accurate dissolved oxygen readings down to the hundredths place (+/- 0.2)
  • Temperature compensation
  • Salinity compensation
  • Pressure compensation
  • Flexible calibration protocol supports one point or two calibration
  • Calibration required only once per year with an Atlas Scientific™ Dissolved Oxygen probe
  • Single reading or continuous reading modes
  • Data format is ASCII

Two data protocols

  • UART asynchronous serial connectivity
  • (RX/TX voltage swing 0-VCC)
  • I2C (default I2C address 0x61)
  • Compatible with any microprocessor that supports UART,or I2C protocol
  • Operating voltage: 3.3V to 5V
  • Works with any off-the-shelf galvanic
  • HDPE dissolved oxygen probe

Sleep mode power consumption

  • 0.995mA at 3.3V

 


KNOW MORE ABOUT

Atlas Scientific Dissolved Oxygen Circuit

Understanding Dissolved Oxygen


TUTORIALS

Wiring Diagram

Arduino UNO sample code

Arduino MEGA sample code

Raspberry Pi sample code

Reviews

There are no reviews yet.

Be the first to review “Atlas Scientific Dissolved Oxygen Test Kit”

Your email address will not be published. Required fields are marked *

TOP